Eshop roka 2025 s vykurovacou technikou

Valvola a tre vie IVAR.AS62 con servocomando 230 V, a passaggio diretto, 3/4" M

Codice: 15AS62
Non valutato Dettagli sulla valutazione
136,53 € –20 %
Trojcestný ventil IVAR.AS62 so servopohonom 230 V, priamy, 3/4" M
136,53 € –20 % 109,22 € / pz. 88,80 € IVA esclusa Prezzo della misura:
Consegna internazionale
Disponibile dal fornitore

Informazioni dettagliate

Descrizione dettagliata del prodotto

IVAR.AS62 (codice 15AS62) è un kit composto da valvola a tre vie e servocomando lineare 230 V, versione diretta, attacco 3/4" M. La valvola è interamente in ottone ed è destinata a generatori di calore, impianti di riscaldamento centralizzati e a distanza e all’uso come valvola deviatrice.

Funzione e dati

  • nella posizione base dell’otturatore l’ingresso comune A è collegato all’uscita B; nella posizione alta (corsa circa 7 mm) il flusso si inverte dall’ingresso A all’uscita C
  • PN 10, temperatura del fluido da +2 °C a +90 °C, pressione differenziale massima 0,4 bar
  • corpo in ottone CW617N-DW, otturatore in acciaio inox AISI 304, O-ring in NBR ed EPDM
  • fluido ammesso: acqua o miscela con al massimo 40 % di glicole propilenico o etilenico
  • sono ammessi solo servocomandi lineari del costruttore

Collegate la valvola rispettando le frecce del senso di flusso. Affidate il montaggio a un tecnico qualificato.

Dati tecnici

Codice15AS62
ProduttoreIVAR
TipoIVAR.AS62
Alimentazione230 V
Attacco3/4" M
Pressione di esercizio max.PN 10
Intervallo di temperaturada +2 a +90 °C
Pressione differenziale max.0,4 bar
MaterialeOttone; otturatore in acciaio inox AISI 304

Domande frequenti

Che cosa contiene il kit 15AS62?
Una valvola a tre vie, molle di fissaggio e un servocomando lineare 230 V.

In quale intervallo di temperatura funziona la valvola?
La temperatura del fluido può andare da +2 °C a +90 °C con PN 10.

A che cosa fare attenzione nel montaggio?
La valvola va collegata secondo le frecce del senso di flusso e il servocomando si monta sull’adattatore superiore o lateralmente. Sono ammessi solo servocomandi del costruttore.

Parametri aggiuntivi

Categoria: valvole di zona
Garanzia: 2 anni
Codice: 15AS62
Produttore: IVAR
Tipo: IVAR.AS62
Alimentazione: 230 V
Attacco: 3/4" M
Pressione di esercizio max.: PN 10
Intervallo di temperatura: da +2 a +90 °C
Pressione differenziale max.: 0,4 bar
Materiale: Ottone; otturatore in acciaio inox AISI 304

Valutazione del prodotto

Sii il primo a inserire un articolo in questa voce!

Non compilare questo campo

Che voto daresti a questo prodotto? Scegliete da 1 a 5 stelle, dove 1 è la valutazione peggiore e 5 quella migliore.

Discussione

Sii il primo a inserire un articolo in questa voce!

Non compilare questo campo

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.