Eshop roka 2025 s vykurovacou technikou

Modulo per la produzione di acqua calda IVAR.T-FAST iT 40 PRO – 44 l/min, pompa ON/OFF

Codice: IVA49060790
Non valutato Dettagli sulla valutazione
3 263,19 € –20 %
Modul pre prípravu teplej vody IVAR.T-FAST iT 40 PRO – 44 l/min, čerpadlo ON/OFF
3 263,19 € –20 % 2 610,55 € / pz. 2 122,40 € IVA esclusa Prezzo della misura:
Consegna internazionale
Su ordinazione (1-2 settimane)

Informazioni dettagliate

Descrizione dettagliata del prodotto

Il modulo compatto e completamente premontato IVAR.T-FAST iT 40 PRO produce acqua calda in modo istantaneo, solo nel momento del prelievo. Prende energia da un accumulo, da un impianto solare, da una caldaia o da un'altra fonte di calore, perciò il bollitore è superfluo.

  • Portata massima nel circuito secondario 44 l/min, portata minima di attivazione 2,0 ± 0,5 l/min
  • Scambiatore a piastre da 1,9 m², portata massima nel primario 2360 l/h, perdita di carico lato acqua calda 0,9 bar
  • Campo di regolazione della temperatura 40 ÷ 55 °C, la pompa primaria Wilo PARA SC 15/1-6 lavora in ON/OFF secondo il prelievo
  • Pressione max. di esercizio 10 bar, temperatura max. 90 °C, attacchi 3/4″ F / 1″ M, dimensioni 610 × 410 × 260 mm, alimentazione 230 V AC

In fase di installazione servono una valvola di ritegno e un vaso di espansione sull'ingresso dell'acqua fredda allo scambiatore e, a protezione del modulo, il filtro magnetico IVAR.DIRTSTOP; con durezza oltre 25–30 °f è necessario trattare l'acqua. Il kit di ricircolo IVAR.KIT IE 40 PRO non è incluso. Montaggio e collegamento elettrico spettano a un tecnico qualificato.

Dati tecnici

CodiceIVA49060790
ProduttoreIVAR
TipoIVAR.T-FAST iT 40 PRO
Portata max. secondario44 l/min
Portata min.2,0 ± 0,5 l/min
Superficie scambiatore1,9 m²
Pressione max. di esercizio10 bar
Temperatura max.90 °C
Attacchi3/4″ / 1″ (F / M)
Dimensioni610 × 410 × 260 mm
Alimentazione230 V AC; 45 W

Domande frequenti

Il kit di ricircolo è incluso nel modulo IVAR.T-FAST iT 40 PRO?
No. Il kit IVAR.KIT IE 40 PRO è un accessorio opzionale da ordinare separatamente.

Cosa occorre prevedere sul lato acqua fredda?
Una valvola di ritegno e un vaso di espansione sull'ingresso dell'acqua fredda allo scambiatore, più il filtro magnetico IVAR.DIRTSTOP a protezione del modulo. Oltre 25–30 °f l'acqua va trattata.

Con il modulo serve anche un bollitore?
No. L'acqua viene scaldata in istantaneo nello scambiatore a piastre solo al prelievo; l'energia arriva dalla fonte di calore, ad esempio un accumulo.

Parametri aggiuntivi

Categoria: stazioni abitative IVAR.SAT
Garanzia: 2 anni
Codice: IVA49060790
Produttore: IVAR
Tipo: IVAR.T-FAST iT 40 PRO
Portata max. secondario: 44 l/min
Portata min.: 2,0 ± 0,5 l/min
Superficie scambiatore: 1,9 m²
Pressione max. di esercizio: 10 bar
Temperatura max.: 90 °C
Attacchi: 3/4″ / 1″ (F / M)
Dimensioni: 610 × 410 × 260 mm
Alimentazione: 230 V AC; 45 W

Valutazione del prodotto

Sii il primo a inserire un articolo in questa voce!

Non compilare questo campo

Che voto daresti a questo prodotto? Scegliete da 1 a 5 stelle, dove 1 è la valutazione peggiore e 5 quella migliore.

Discussione

Sii il primo a inserire un articolo in questa voce!

Non compilare questo campo

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.