Eshop roka 2025 s vykurovacou technikou

Modulo caldaia IVAR.KTV3-125 DN 25 con valvola miscelatrice a 3 vie e circolatore DAB.EVOSTA2 40-70/180 – OFFERTA IVAR.KTV3-125

Codice: IVA49072522DAB
Akcia
Non valutato Dettagli sulla valutazione
768,75 € –10 %
Kotlový modul - 3cestný zmiešavací ventil - DN 25; DAB.EVOSTA2 40-70/180 – AKCIA
768,75 € –10 % 691,88 € / pz. 562,50 € IVA esclusa Prezzo della misura:
Consegna internazionale
Disponibile dal fornitore

Informazioni dettagliate

Descrizione dettagliata del prodotto

Il modulo caldaia IVAR.KTV3-125 è un gruppo di valvolame già assemblato che prepara l'acqua per il circuito di riscaldamento e la miscela alla temperatura richiesta. È indicato quando il generatore fornisce una temperatura molto variabile, ad esempio nelle caldaie a combustibile solido.

  • riscaldamento a radiatori, a pavimento e a parete in circuito chiuso ad acqua calda
  • potenza fino a 37,2 kW con ΔT 20 K, portata 1600 l/h, Kvs 8,3
  • dotazione: tubi di mandata e ritorno, valvola miscelatrice a 3 vie, circolatore elettronico DAB.EVOSTA2 40-70/180, valvole a sfera con termometri, valvola di ritegno e isolamento EPP
  • attacco generatore 6/4" M, circuito di riscaldamento 1" F, interasse 125 mm

Il servomotore IVAR.SRVM ECOMIX 230 V e la staffa a parete IVAR.KIT K2 si ordinano a parte. Prima dell'avvio conviene lavare l'impianto; il montaggio spetta a un professionista.

Dati tecnici

CodiceIVA49072522DAB
ProduttoreIVAR (čerpadlo DAB)
TipoIVAR.KTV3-125
Diametro nominaleDN 25
Potenza max. (ΔT 20 K)37,2 kW
Portata max.1600 l/h
Pressione max. di esercizio6 bar
Temperatura max. di esercizio95 °C
Attaccoingresso 6/4" M, uscita 1" F
CircolatoreDAB.EVOSTA2 40-70/180
Dimensioni400 × 250 × 240 mm

Domande frequenti

Per quali circuiti di riscaldamento è pensato il modulo?
Per riscaldamento a radiatori, a pavimento e a parete in impianti chiusi ad acqua calda. La valvola miscelatrice consente di collegare anche generatori a temperatura molto variabile, come una caldaia a combustibile solido.

Il servomotore è incluso nel modulo?
No, il servomotore IVAR.SRVM ECOMIX 230 V è un accessorio opzionale. Anche la staffa a parete IVAR.KIT K2 si aggiunge separatamente.

Quale circolatore è montato su questo codice?
Il circolatore elettronico DAB.EVOSTA2 40-70/180. Lo stesso modulo senza circolatore ha un altro codice, IVA49072503.

Parametri aggiuntivi

Categoria: moduli e gruppi IVAR.KS per caldaia
Garanzia: 24
Codice: IVA49072522DAB
Produttore: IVAR (čerpadlo DAB)
Tipo: IVAR.KTV3-125
Diametro nominale: DN 25
Potenza max. (ΔT 20 K): 37,2 kW
Portata max.: 1600 l/h
Pressione max. di esercizio: 6 bar
Temperatura max. di esercizio: 95 °C
Attacco: ingresso 6/4" M, uscita 1" F
Circolatore: DAB.EVOSTA2 40-70/180
Dimensioni: 400 × 250 × 240 mm

Valutazione del prodotto

Sii il primo a inserire un articolo in questa voce!

Non compilare questo campo

Che voto daresti a questo prodotto? Scegliete da 1 a 5 stelle, dove 1 è la valutazione peggiore e 5 quella migliore.

Discussione

Sii il primo a inserire un articolo in questa voce!

Non compilare questo campo

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.